H4-DV-23-A uctuating direction of load Line frequency Hz For Helical gear box H4

Flender/Flender Gear Units/Helical gear box H4

ing calculations ) Earthing & Lightning calculations & drawings ) Complete On-grid solar system working philosophy. ) Cable size selection calculation considering the voltage drop & insulation along with voltage grade, type, size and Cable schedule ) System protections provided at various stages of the system ) .. of solar panel and charge controller. ) .. drawing of 4V 3x1 Ph charger, PCU. ) Schematic ) Bill of Material ) Installation manual ) Operation & Maintenance Manual ) Wiring diagram for reference. 0.1.1.2 Final drawings/data sheets, operation & maintenance manual and erection instructions shall be submitted in six prints / One Soft Copy. 0.1.1 TESTING OF SOLAR MODULES Solar modules shall be tested as per the test sequence mentione in the IEC: 6 & IEC: 6. Insulation test of Modules- 5V DC+2 Max System Voltage (For Modules less that 0.1 ar ea) 1V DC+2 Max System Voltage (For Modules area greater than 0.1 area) Value of Insulation Resistance should be as per IEC; 6 0.1.1 INSPECTION Inspection and testing of equipment shall be carried out by the / the works of the contractor and performance test at site on final product to ens ure conformity of the same with the 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Solar photo voltaic ( SPV) power supply system Chapter-0.1 2, MECON Limited, All Right Reserved Page 2 of 2 acceptable criteria of technical specification, approval drgs. and reference national/ international standards. 0.1.1.1 The contractor shall submit Quality Assurance Plan (QAP) for re spective equipments within 3 weeks of award of contract. QAP shall be prepared and furni shed by the contractor in MECON Form No. 1.2(4. -1 along with their internal in process quality checks. 0.1.1.2 Tests as per international standard for solar system and