H3-FH-15-D flender himmel Helical speed reduction gearbox H3

Flender/Flender Gear Units/Helical speed reduction gearbox H3

er, Two Blades, Square Hole, Fab Mild Steel, Tungsten Carbide Coated / 1 CR2 Blade Whirler, Round Hole, Cast / Nut & Screw 1 1 CR2SS Blade Whirler, Round Hole, Stainless Steel / Nut & Screw 1 1 1S0 Washer Spring M1 1 1 CR5 Sleeve 1 CR2 Motor Electric 7.5Kw D1M 4V 3Ph 1 CR2 Motor Support Bracket 1 CR3 Pulley Whirler 3MM Dia 1 CR3 Bush Taperlock 1 CR3 Pulley Motor 1MM Dia 1 CR3 Bush Taperlock 1 CR1 Belts Whirler ( Set of Two) 1 Set2 CR5 Guard Belt 1 CR3 Key Parallel Round Ends, Whirler Pulley 1RP2XD WHIRLER ASSEMBLY (MOTOR UP 4V 3PH 5HZ) Alternative Whirler Blades, Not IllustratedStraight Blade, Welded Hardened Edge, obsolete, use item 2 CR3 Key Parallel, Motor Pulley 1 2 1S0M Screw Set Motor Adjusting M1 7 2 7S0 Nut M1 2 1S0F Screw Blade Retaining M1 3 7S0 Nut M1 3 1S0G Screw Set M1 4, Whirler to Top Structure 6 2S0 Washer Flat M1 8 1S0 Washer Tapered 2 6S0 Nut 'Binx' Self Locking 4 1S0F Bolt M1 4 Motor to Support Bracket 4 2S0 Washer Flat M1 4 CSE1 Spacer 2 1S0 Washer Spring M1 4 7S0 Nut M1 4RP2XD WHIRLER ASSEMBLY (MOTOR UP 4V 3PH 5HZ) CROKER LOADER WIRE ROPE RENEWAL PROCEDURE 1. Place the Hopper on the hopper stops. Loosen nut from rope anchor bolt, item 1, on one rope drum only, item 2. 2. Remove end of old wire rope from anchor bolt. 3. Fit end of new wire rope to anchor bolt and tighten nut. 4. Lay other end of new wire rope end to end with old wire rope removed in part 2. Bind both ends together with sticky tape (electrical or maskingtape). 5. Carefully pull on the old wire rope to pull the new wire down to the bottom of the hopper and around the rear axle rope pulley, item 3, and upthrough the front axle rope guide, item 4. 6. Remove front axle rope retainer blocks, items 5 and 6, and slide onto the new rope. 7. Continue to pull the wire and thread through the second rope guide, item 7, and down around the second rope pulley, item 8, and up to the secondrope drum, item 9. 8. Remove old wire from second anchor bolt, item 1, on second rope drum, item 9, a