H3-FH16A flender reductores Helical gear Reduction Box H3

Flender/Flender Gear Units/Helical gear Reduction Box H3

er, which can extend drain intervals and prolong gear and bearing life. ASTM D2 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils: The oil is heated to 1C (2F) for 3 hours. The results indicate the oils tendency to allow formation of varnish and sludge.Conventional Industrial Gear OilMeropa XL Meropa XLs advanced additive technologies help prevent varnish and sludge. caltex HB series gearbox Help reduce costs by achieving longer lubricant life. Meropa XL gear oils are engineered to deliver outstanding performance over long service period, which helps reduce maintenance costs. It is approved by Siemens MD, standard that requires minimum of 1,0 hours1 lubricant life. In the field, specific lubricant life and drain intervals depend largely on the speed, load and operating environment, as well as the age and condition of the equipment.* Protect the bearings while protecting the gears. Bearings are often overlooked when considering proper gearbox lubrication, yet they are vital to the operation. Bearings are responsible for aligning the gears properly. When they begin to wear, the drive shaft wobbles, the gears misalign and gear teeth can be damaged. Meropa XL was tested against competitive products for roller bearing wear using the FE-8 test rig and DIN 5-3, an industry-standard followed by most major manufacturers. The test is designed to determine the amount of wear occurring in rolling bearings at speed of 7.5 RPM for 8 hours. You can see the results in the chart on page 5. Meropa XL outperforms other products, even those formulated to meet similar industry-standard wear requirements. Meropa XL Roller ElementNew Roller Element Meropa XL advanced protection is clearly evident. The original honing marks have not been polished or worn away after testing when compared to brand new roller element. 1 Specification of the Gear Oil Approval For FLENDER Gear Units, Siemens MD 2-2-2. *Always follow OEM recomme