Selection and ordering data Dimensions in mm Gear B3-HH12A Bevel-helical gear box B3

Flender/Flender Gear Units/Bevel-helical gear box B3

proces pressure. .1 Ultrasonic Flowmeters Ultrasonic Flow Meters shall be used on pipe of larger dia. Ul trasonic type flow sensing system consists of the se nsors and the transmitter. Th system shall be capable of continuously measuring and displaying the flow of th water in the pipe line. The sensor shall be insertion type. The sensor shall include th source and receiver. The source and receiver shall be arranged diagonally with single traverses, for better signal quality. Sensor material shall be SS. The measuring arrangement shall ensure to provide stable, linear and accurate measured value. However it is preferred to have dual path measurement with 2 se nsor pairs. Full flow in the pipe shall be always ensure for correct measurement . 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Control & Instru mentation (&) Chapter-0.0 2, MECON Limited, All Right Reserved Page 7 of 1 Transmitters shall be of the SMART type with HART Protocol. The output of the transmitter shall be 4-2mA DC, isolated. Transmitter shall be of remote type with LCD display. The transmi tter shall be mounted at convenien remote location. Required cable between ensor and transmitter shall provided. The cable entry to the transmitter sha ll be NPT. The power supply to the transmitter shall be 2V DC and the transmitter shall power the sensor. The transmitter shall be of die-cast aluminum. The accuracy of the system shall be 0.1% of FSD. System accuracy shall not be affected by changes in process medium concentration, density, particle size distribution. The system shall be suited for outdoor installati on and shall have IP6 or better enclosure. The system shall provide at leas , but not be limited to, the following features: * Frequency optimization suit the application. * Non-volatile memory. * Atten