Article No and Article No supplement for th t B3-DH10A Bevel-helical gear Reduction Box B3

Flender/Flender Gear Units/Bevel-helical gear Reduction Box B3

rating conditions. It is therefore very difficult to calculate it reliably. If the operating conditions are specified by the operator, the bearing life can becalculated and indicated on the rating plate. If no information is given, changes in the vibration and noise pattern can serve as an indication that an immediate bearing replacement is necessary. Check that covers andplugs are securelyfastened regularlyEntry of foreign bodies maycause sparks. Check that fasteningscrews of mountedelements are securelytightened after 1h, then regularlyLoose parts can cause sparksthrough impact. All measures and checks and their results must be documented by the operator and kept in safe place. Maintenance and servicing must be carried out only by properly trained, authorised personnel. Only parts supplied by Flender must be used for servicing. 4 / 4Supplement to ATEX1. Declaration of the manufacturer - Declaration of Conformity EG Declaration of Conformity Document no. KE GKFSN2 DE / 1.0 Equipment designation: MOTOX- gear unit series Type: , , , , , Sizes: 3 to 1 Add-on subassemblies: and The designated equipment conforms to the requirements of the explosion protection guideline 9/9/EEC.The designated equipment has been developed and manufactured in conformity to thefollowing European standards: EN 1/1 EN 1-1 /1 EN 1-1 /2 pr EN 1-5 /2 pr EN 1-8 /2 EN 5-1/-2 /1 pr EN 1-6 /2 Kind of explosion protection for equipment group II of category 2 and 3: II2 / ck T4/1 CII2 / bck T4/1 CII3 / ck T4/1 EC Declarations of Conformity and/or EC Type Test Certificates for further equipment added to the gear unit and/or for safety systems are enclosed. These may be specifically: Rotating electrical machines Safety systems for oil level and/or temperature monitoring equipment The technical documentation for gear units of category 2 has been subjected to voluntary inspection and deposited with the specified office no. 0 TV PRODUCT SERVICE GmbH,Ridlerstrae 3, - 8 Mnchen. Tbingen, 1.1.2