Type Size d l G l kg Solid shaft with paralle B3DH-10-C Bevel-helical gearboxes B3

Flender/Flender Gear Units/Bevel-helical gearboxes B3

ratio, . of bends, bending radius. Should follow TIE/EIA 5 wh ile terminating the cable. 0.1.0 Testing and Commissioning: All test as called for the specif ication shall be carried out the contractor through specialist, in accordance with the specification and manufactur er, applicable standards and as approved by client/ PMC. Testing and commissioning of system component testing, and integrated system testing. During the in tegrated system testing, the system would be tested for its fun ctionality, operation and per formance. All the fault , alarm and changeover condition shall be simulated during the in tegrated system test. Mimimum duration of system integrator test would be 4 hours. he contractor would have to perform these tests suc cessfully for the system to be accepted. detailed testing and commissioning plan shall be prepared by the contractor on guidance from the client / PMC. All type and routine test as required sh all be carried out at the works of the manufacturer at the site. On completion of the installat ion, the contractor shall arrange to carry out arious initial test as per manufacturer pecification nd best practice. Completeness of system: The contractor shall provide all the required material, equipment, ancillary items etc. to install complete Energy monitoring, IT (LAN) and telecom system fulfilling the intent and purpose of the contract whether or no each and every item is mentioned in the specification / drawing. Any shortcoming notic ed at any stage would be made included in the scope of he bidder and no extra cost shal be payable. ACCEPTANCE TESTING for OFC and UTP Its essential to have certified test report from the OEM, wi th regard to the testing of Fiber in this FTT Environment. The testing should happen on ll the three wavelengths 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT