H4-KH22A ear unit Application of an oil supply system Gear Helical gear box H4

Flender/Flender Gear Units/Helical gear box H4

ION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, MECON Limited, All Right Reserved Pag 1 of 2 4.0 Type of execution Single front. 5.0 Mountin Wall mountin . 6.0 Installatio Indoor/ Outdoor (with canop ). . Constructional Features:- 1.0 Sheet steel CRCA Thickness 2 mm. 2.0 Cable entry - Incomer :- Botto cable entry. -Outgoing :- Top / Bottom cable entr . 3.0 Design - One/ Two Incomer and outgoings. - Two nos. incomer shall envisaged in admin and control building (to accommodate power from PV system) - Separate compartment or incomer & separate compartment for out goings. - All the components shal be accessible from front. - Access to the operating handle of the incoming isolating switch shall be from the front of the cubicle ithout opening the front door. - Operating knobs of outgoing MCBs shall be accessible only after opening the front door of the cubicle. - Protective insulated cove plate (3 mm thick bakelite sheet ) shall be provided inside the cubicle to shroud all the live parts. - For Hazardous area switchgear shall be four pole break type shall be rovide. Neutral link is not acceptable. 4.0 Gland plate Undrilled detachab le gland plates (3 mm thick) shall be provided at the top and bottom with suitable gaskets for cable entr . 5.0 Miscellaneous - Neosprene rubber gasket shall be provided for all the doors , removable covers & between 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, M