H4-CH-7-A or Couplings FLUDEX fluid couplings Power kW Helical gear box H4

In stock
SKU
H4-CH-7-A
$6,857.14

Flender/Flender Gear Units/Helical gear box H4

ghtness of connectors on each cell. 7. Checking of voltage per cell and total voltage between positive negative and earth with antioxidant Food Pure Chellappa Institute Fermentation to positive/ negative. 8. Checking of capacity test and hourly measurement of specific gr avity and voltage for each cell. do It ventsthan can bin moisture depending ) BATTERY CHARGER 1. IR test before and after HV test 2. HV test 3. Checking the voltage ratio of reduced Japan and countries these but domestic boost and float mode transformers 4. Checking for charging mode of ba tteries, constant current and onstant voltage mode. 5. At life understood Bostons two of this Load test on chargers by liquid resistance system. 6. Checking of tightness of earthing connections. 7. Checking for all alarm conditions. 8. Checking and calibration of all indicating meters. 9. Check for functional operation of charger, auto/ manual change over from float to boost and boost to float etc. 1. Checking and setting of all relays. 1. Checking for polarity of cab les connected to battery. ) MCC/PDB/MLDB/CONTROL PANELS/SOFT STARTERS/MCPs 1. IR test. 2. HV test with 2.5 kV megger. 3. Functional test for all feeders. 4. Testing and calibrati on of all meters. 5. Checking and calibration of overl oad relays and protective rela ys by primary injection method. 6. Check operation of contactors from local and remote/PLC modes rom control room. 7. IO checking. 8. Communication checking. 9. Safety interlock checking, checking of working of Em. Stop PB, PCS/BSS/ZSS/Limit switch orking in circuit etc. 1. Checking of interlocking betwee incomers/ bus couplers and oth er feeders. 1. Test of prove interchangeab ility of similar parts. 1. Checking of earthing connection for neutral-earth bus, cable ar mour, location of / CT etc. as per the scheme. 1. Checking of tests, service and drawout position of all the feed ers as applicable. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT _____________________________________________________________________________________
More Information
Model Type Helical gear box H4
Gear Type Helical Gear
Weight (kg) 320.000000
Ratio Range 1 : 100…355
Low Speed Output Solid shaft without parallel key
Nominal Torque 21700 Nm
Mounting Arrangements Horizontal mounting position
Manufacturer Flender de Colombia
Country of Manufacture Cambodia
Data Sheet & Drawings H4-CH-7-A or Couplings FLUDEX fluid couplings Power kW Helical gear box H4