flender chennai address H3DH-10-C Helical gear Reduction Box H3

Flender/Flender Gear Units/Helical gear Reduction Box H3

e set of the qualifying radiographs on he job shall be kept ' tandard for the quality of production radiographs during the job. The other two sets shall be retained by COMPANY for its permanent record. 3.8 Three copies of the exposure charts relating to material hickness, kilo voltage, source to film distance and exposure time shall also be made available to aCOMPANY by the CONTRACTOR. 3.9 The CONTRACTOR shall, on daily basis, record for each radiograph ( radiography number ( approximate chainage of weld location, ( whether not the welds meet the specified acceptance standards and ( the nature and appro ximate location of unacceptable defects observed. It must be possible to relate to particular butt weld and welder on piping drawing and pipeline alignment drawing. 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 5 of 6 TITLE MEC//0/2/0 REVISION : 0 PIPING FABRICATION AND ERECTION EDITION : 1 3.1 Each day' production of processed radiographs shall be roperly packaged separately, identified by at least the ( date, ( radiographic unit, ( job locations, ( starting and ending progress survey stations and ( shall include original and three copies of the daily radiographic record. The package shall be submitted the COMPANY daily when possible, but in no event later than noon of the following day. 3.1 The CONTRACTOR shall provide all the necessary facilities at site, such as dark room with controlled temperature, film viewer etc. to enable the COMPANY to examine the radiographs. 3.1 The CONTRACTOR, if found necessary, may modify the proced ure of radiographic examination suiting the local conditions prevailing. This shall , however, be subject to the approval of the COMPANY. 3.1 COMPANY shall have free ccess to all the CONTRACTOR' wo rk facilities in the field. 3.1 Any approval g