H3-SV25-B walther flender Helical gear boxes H3

Flender/Flender Gear Units/Helical gear boxes H3

CHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 8 of 5 TITLE MEC//0/2/6 REVISION : 0 HEALTH, SAFETY AND ENVIRONMENT (HSE) MANAGEMENT EDITION : 1 any point of rope. In order to avoid shock, the system should be capable of keeping the person in vertical position in case of fall. Contractor shall ensure that Full body harnesses conforming EN3 6 and having authorized CC marking is used by all personnel while wor king at height. The lanyards and life lines should have enough tensile strength to take the load of the worker in case of fall. One end of the lanyard shall be firmly tied with the harnesses and the other end with life line . The harness should be capable of keeping the workman vertical in case of fall, enabling him to rescue himself. Contractor shall provide Roof Top Walk Ladders for carrying out activities on sloping roofs in order to reduce the chances of slippages and alls. ) Contractor shall ensure that proper Safety Net System shall be used at appropriate locations. The safety net shall be located not more than 3 feet (9.0 metres) below the working surface at site to arrest or to reduce the consequences of possible fall of persons working at different eights. ) Contractor shall ensure that flash back arrestors conforming to BS:6 or equivalent are installed on all gas cylinders as well as at the torch end of the gas hose, while in use. All cylinders shall be mounted on troll eys and provided with closing key. The burner and the hose placed downstream of pressure reducer shall be equipped with Flash Back Arrester / Non Return Valve device. The hoses for acetylene and oxygen cylinders must be of different colours. Their connections to cylinders and burners shall be made with safety collar. At end of work, the cylinders in use shal be closed and hoses depressurized. All welding machines shall have effective earthing. In order to help maintain good housekeeping, and to reduce f