H3-DV7-B flender revenue Helical speed reduction gearbox H3

Flender/Flender Gear Units/Helical speed reduction gearbox H3

easures must be taken. This work must always be done by specialist electricians. If any inexplicable changes are noticed during operation of the gear unit, such as an important increase in temperature or unusual noises, the drive assembly must be switched off immediately. Rotating and/or movable drive components must be fitted with suitable safeguards to prevent contact. 2 / 1BA 5 en 0/2When the gear unit is incorporated in plant or machinery, the manufacturer of such plant or machinery must ensure that the contents of these instructions are incorporated in his own instructions. When removing the safety equipment the fixation means should be stored for later use. Removed safety equipment must be reinstalled prior to starting up. Notices attached to the gear unit, .. rating plate, direction arrows etc., must always be observed. They must be kept free from dirt and paint at all times. Missing plates must be replaced. Screws which have been damaged during assembly or disassembly work must be replaced with new ones of the same strength class and type. Spare parts should always be obtained from Siemens (refer also to section . 3.2 Environmental protection Dispose of any packing material in accordance with regulations or separate it for recycling. When changing oil, the used oil must be collected in suitable containers. Any pools of oil which may have collected should be removed at once with an oilbinding agent. Preservative agents should be stored separately from used oil. Used oil, preservative agents, oilbinding agents and oilsoaked cloths must be disposed of in accordance with environmental legislation. Disposal of the gear unit after its useful life: Drain all the operating oil, preservative agent and/or cooling agent from the gear unit and dispose of in accordance with regulations. Depending on national regulations, gearunit components and/or addon parts may have to be disposed of or sent for recycling separately. 3.3 Special dangers and personal prote