H3DV-7-C acople flender Helical gear Reduction Box H3

Flender/Flender Gear Units/Helical gear Reduction Box H3

easuring rods, etc. Hitting projected rods and standing on cantilever rods Persons may get injured and fall down Use safety shoes and avoid standing unnecessarily on cantilever rods Avoid wearing loose clothes Falling of material from height May prove fatal Use helmets Provide safety nets Transportation of rods by trucks / trailers Protruded rods may hit the persons Use red flags/lights at the ends Do not protrude the rods in front of or by the side of drivers cabin. Do not extend the rods 1/3rd of deck length or 1.5 which is less () WELDING AND GAS CUTTING Welding radiates invisible ultraviolet and infrared says Radiation can damage eyes and skin. Use specified shielding devices and other PPE of correct specifications Avoid throated tungsten electrodes for GTAW. Improper placement of oxygen and acetylene cylinders Explosion may occur Move out any leaking cylinder Keep cylinder in vertical position Use trolley for transportation of cylinders and chain them Use flash back arrestors Leakage / cuts in hoses May cause fire Purge regulators immediately and then turn off Never use grease or 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 3 of 5 TITLE MEC//0/2/6 REVISION : 0 HEALTH, SAFETY AND ENVIRONMENT (HSE) MANAGEMENT EDITION : 1 ACTIVITY TYPE OF HAZARD EFFECT OF HAZARD PREVENTIVE MEASURES oil on oxygen line connections and copper fittings on acetylene lines Inspect regularly gas carrying hoses Always use red hose for acetylene & other fuel gases and black for oxygen. Opening-up of cylinder Cylinder may burst Always stand back from the regulator while opening the cylinder Turn valve slowly to avoid bursting Cover the lug terminals to prevent short circuiting. Welding of tanks, container or pipes storing flammable liquids Explosion may occur Empty & purge them before welding Never attach the ground cable to