H2FV-20-C coupling flender n eupex Helical gearboxes H2

Flender/Flender Gear Units/Helical gearboxes H2

ble. When slinging to eye bolts, no lateral pull may be created counter to the direction of the ring level, inorder to avoid breakage of the eye bolts. 1 / 9BA 5 en 0/2AB4 4 Fig. 6: Tilted and lateral pull with eye bolts Permitted tilting in the direction of the ring level (angle maximally Not permitted lateral pull counter to the direction of the ring level For detailed illustration of the gear unit and the position of the attachment points, please refer to the drawings in the order-specific gear unit documentation. 4.3 Storing the gear unit The gear unit must be stored in sheltered place in the position of the original packaging or in the position of use, placed on vibration-free dry base, and covered over.Drive units with grease-lubricated rolling bearings must be stored in the position of use. NOTICE Property damage Any damage to the coating may cause failure of the exterior protective coating and corrosion. When temporarily storing the gear unit and any components supplied with it, the corrosion protectionapplied to them has to be preserved. Ensure that the coat is not damaged. DANGER Danger to life from gear units toppling or dropping Risk of being crushed or struck by gear unit toppling of falling down. Do not stack gear units on top of one another. NOTICE Property damage Damage to the gear unit by deposit of foreign matter or moisture. If the gear unit is stored outdoors, itmust be particularly carefully covered, and it must be ensured that neither moisture nor foreign materialcan collect on the unit. Waterlogging must be avoided. NOTICE Property damage Damage to the gear unit from external effects. Unless agreed otherwise by contract, the gear unit must not be exposed to harmful effects, such aschemically aggressive products. Provision for special environmental conditions during transport (. . transport by ship) and storage (climate, termites, etc.) must be contractually agreed. 1 / 9BA 5 en 0/2.4 Standard coating and preservation The gear unit is