H2-SH-17-D flender loher Helical gear reducer H2

Flender/Flender Gear Units/Helical gear reducer H2

/ LUX Space HE or equivalent. Suitable numbers to be provided for aesthetic in addition above at Sl.No.5. Note:- Wattage of LED Lamps shall be decided so as to provide minimum Lux level specified against each area/premises. The models of the light fittings ma changed during detailed engineering. 3.0 Area Lighting:- External area lighting including street/road lighting / High Ma st lights shall be fed from Outdoor type Feeder Pillar located at suitable plac es. Automatic switching ON/OFF of these circuits shall be done through timers. Street light/High mast/Flood light towers shall be fed through 4/ 2V, 3 phase, 4 wire circuit ith individual fittings distributed at 2V, single phase, with control and protection located at bottom of each tower. DP MCB in sheet steel box shall be provided near each fitting to fac ilitate removal of lamp in off position. 4.0 Lighting Power distribution: The distribution of lighting power supply for the individual areas shall be done at 4V, 3 phase, 4 wire bus system through Main Lighting Distribution Boards (MLDB) for the area. The Each incomer of MLDB shall be fed through separate lighting transformers. Two nos. (minimum) MLDB shall be provided in Sub-station building. The MLDB shall have Double Incomer(One Incomer from ormal power supply & other Incomer from DG source of Power Supply) The outgoing eeders of the MLDB shall feed the required numbers of Sub Lighting Distribution Boards (SLDB) for lighting. Each SLDB shall receive power at 4V AC, 3 phase, 4 wire and distribute it into 2V, 1 phase circuits for connection to the lighting fixtures and 2V receptacles. The SLDBs shall be located in the rooms, bays, shop units, junction housesetc referably near entry/exit. covering the respective zone. The SLDBs shall be located in the electrical rooms in the respective area. The transformer shall be panel mounted with IP4 enclosure, dry type, class insulation located either in field in Elect