B4FV-15-C Overview Oil level indicator Flender FZG gear uni Bevel-helical speed reduction gearboxes B4

Flender/Flender Gear Units/Bevel-helical speed reduction gearboxes B4

y test as per IEC 3 The cable drums are to be provided in good conditions with prop er identification suitable for transportation and storage / handling till lying cable. In case of wooden drums necessary ant term ite treatment to be provided. The cables are to be sealed at both ends prior to dispatch. The manufacturing of Cables are to be carried out as per Qualit program of manufacturer which shall atleast meet the following incoming an process checks: Conductor material, resistivity, dimension, joints and lay leng th shall conform to requirements of International standard or IS-8. The annealin process shall be controlled to meet the re quired strength and finish. Insulation, inner and outer sheat material properties includin FRLS for inner & outer sheath shall meet the requi rement of International standa rd specified/ as per IS-5 and standards for FRLS specified in this specification. Insulated core shall be checked for finish, color and to be tes ted for spark test preferably using on line testers with counter/ identification ystem. The insulation thickness to be controlled to giv the required thickness and oncentricity when measured under prof ile projector. Shielding shall be checked or thickness, width and overlap. Armor wire/ strip samples to be checked for size, tensile, elon gation, wrapping/torsion and galvanization check as per applicable International standard / IS-3. The coverage of armor and absence of overlap to be hecked during armoring process. The extruders used shall have temperature controllers to give mooth finish and free from defects. The outer sheathing color, finish , diameter needs to be control led. The sequential marking shall be legible and be ndented for longer retention. Checks on wooden shall be as per requirement of International tandard / as per IS- 1. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PI