B4-FV-15-D ts are designed with a dip stick for checking the Bevel-helical gear Reduction Boxes B4
In stock
SKU
B4-FV-15-D
$77,785.71
Flender/Flender Gear Units/Bevel-helical gear Reduction Boxes B4
y the Engineer-in-charge. Defects, if any, noticed during testing shall be rectified immediately and retesting of the system/line shall be
done by he contractor at his cost. 5.6 Test Records Records in triplicate shall be prepared and submitted by the 
contractor for each piping system, for the pressure test done in the proforma provided / approved by the Engineer-in-charge. 1 
of 1 SPECIFICATION FOR GASKETS, BOLTS & NUTS SPECIFICATION NO.: MEC//0/2/1 (OIL & GAS SBU) MECON LIMITED DELHI 1 0 
Rev. : 0 Edition : 1 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 1 of 1 TITLE MEC//0/2/1 REVISION : 0 GASKETS, BOLTS & NUTS EDITION : 1 SL.NO. DESCRIPTION 1.0 GASKETS 2.0 NUTS AND BOLTS PREPARED BY: (Shalini Singh) CHECKED BY: (Sunil Kumar) APPROVED BY: (.. Johri) ISSUE DATE : Jan. 2 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 1 of 4 TITLE MEC//0/2/1 REVISION : 0 GASKETS, BOLTS & NUTS EDITION : 1 TECHNICAL NOTES FOR GASKETS 1.0 All gaskets shall conform to the codes/standards and specifications given in the requisition. Vendor shall strictly comply with MR / PR stipulations and no deviations shall be permitted. 2.0 Process of manufacture, dimensions and tolerances not specif ied in requisition shall be in accordance with the requirements of the manufacturer' standards. 3.0 Test reports shall be supplied for all mandat ory tests for gaskets as per the standards specified in the requisition. 4.0 Chemical composition and hardness of RTJ gaskets shall also be furnished in the form of test reports on samples. 5.0 For Spiral wound material following shall be furnished: . Manufacturer' test certificate for filler material and spiral material as per the relevant material specifications. . Manufacturer' test certificate for raw materials and tests for compressibility / seal- a| Model Type | Bevel-helical gear Reduction Boxes B4 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 3630.000000 |
| Ratio Range | 1 : 80…315 |
| Low Speed Output | Flanged shaft |
| Nominal Torque | 153000 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender de Mexico, S.A. de C.V. |
| Country of Manufacture | China |
| Data Sheet & Drawings | B4-FV-15-D ts are designed with a dip stick for checking the Bevel-helical gear Reduction Boxes B4 |
Related Products
