brication Forced lubrication Overview continued Li B4DV-11-C Bevel-helical speed reducer B4
In stock
SKU
B4DV-11-C
$31,821.43
Flender/Flender Gear Units/Bevel-helical speed reducer B4
uent editions. 4 / 9BA 5 en 0/2Foreword The term "Assembly and operating instructions" will in the following also be
shortened to "instructions" or "manual". Symbols in these assembly and operating instructions This symbol additionally indicates an imminent risk of 
explosion in the meaning of Directive 9/9/EC. This symbol additionally indicates an imminent risk of burns due to hot surfaces 
in the meaning of standard "DIN EN ISO 1". Earthconnection point Airrelief point yellow Oilfilling point yellow Oildraining point white 
Oil level red Oil level red Oil level redConnection for vibrationmonitoring device Lubricating point red Apply grease Lifting eye Eye bolt Do not unscrew Alignment surface, horizontal Alignment surface, vertical These symbols indicate the oillevel checking procedure using the oil dipstick. These symbols indicate that the oil dipstick must always be firmly screwed in. 5 / 9BA 5 en 0/2Contents 1. Technical data 8 ..................................................... 1.1 General technical data 8 ............................................................... 1.2 Versions 9 ........................................................................... 1.2.1 Gear unit types 9 ..................................................................... 1.2.2 Ambient temperature 1 ................................................................ 1.3 Measuring-surface sound-pressure level 1 ............................................... 1.4 Weights 1 ........................................................................... 1.5 List of equipment 1 .................................................................... 2. General notes 1 ..................................................... 2.1 Introduction 1 ........................................................................ 2.2 Copyright 1 .......................................................................... 3. Safety instructions 1 ................................................. 3.1 Obligations of the| Model Type | Bevel-helical speed reducer B4 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 1485.000000 |
| Ratio Range | 1 : 80…315 |
| Low Speed Output | Hollow shaft with shrink disk |
| Nominal Torque | 61600 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | WALTHER FLENDER GMBH |
| Country of Manufacture | Samoa |
| Data Sheet & Drawings | brication Forced lubrication Overview continued Li B4DV-11-C Bevel-helical speed reducer B4 |
Related Products
