Bevel-helical gear Reduction Box B4 minimum options of a double changeover filter n B4-KV13A

Flender/Flender Gear Units/Bevel-helical gear Reduction Box B4

ve and so that an alarm is output. Bypass this signal in operation. Further information Additional information about the oil level monitoring system can be found in the operating in- structions for the oil level monitoring system components provided in the complete gear unit documentation. You can find technical data in the separate data sheet and in the list of equipment in the complete gear unit documentation. 5.5.7 Connecting the Pt 1 resistance thermometer 5.5 Connecting components Procedure To connect the Pt 1 resistance thermometer, proceed as follows: 1.Check that the Pt 1 resistance thermometer connection is not damaged. 2.Install the electrical wiring between the Pt 1 resistance thermometer and the evalu- ation unit. The customer is responsible for providing the evaluation unit. Further information Further information about the Pt 1 resistance thermometer can be found in the Pt1 res- istance thermometer operating instructions in the complete documentation for the gear unit. 5.5.8 Connecting the temperature monitor 5.5 Connecting components Procedure To connect the temperature monitor to the gear unit, proceed as follows: 1.Make sure that the temperature monitor connection is undamaged. 2.Install the electrical wiring for the temperature monitor. Further information Further information about the temperature monitor can be found in the temperature monitor operating instructions in the complete documentation for the gear unit. Assembly 5.5 Connecting components B5-0 en Edition 0/2 5.5.9 Connecting the bearing monitoring system 5.5 Connecting components Procedure To connect the bearing monitoring system to the gear unit, proceed as follows: 1.Make sure that the connections provided for holding the bearing monitoring equipment are undamaged. 2.Install the bearing monitoring equipment at the customer' site. Further information Further information about the bearing monitoring system can be found in the operating in- structions for the bearing monitoring system com