Bevel-helical gear boxes B4 or depending on the job and installation situat B4-KV-13-D

Flender/Flender Gear Units/Bevel-helical gear boxes B4

ve qualified trained and experienced surface preparation, paint applicator, inspector, and supervisors. The contractor supervisor, inspector surface perpetrator and paint applicator must be conversant with the standards referred in this specification th contractors capacity, capability and competency requirements for the job sh all be quantified in the tender document and shall be assessed by an ECON team before awarding any job. 2.0 PROCEDURE FOR APPROVAL OF NEW COATING MATERIALS AND MANUFACTURERS Following procedure is recommended to be followed for approval of new manufacturers. 2.1 The manufacturer should arrange testing of the inorganic inc silicate coating materials as per the list of tests given in para 2.5 elow from one of the reputed Government laboratories. 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 4 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 2.2 Samples of coating should be submitted to the Govt. laboratory in sealed containers with batch no. and test certificate on regular forma of manufacturers testing laboratory. The sampling shall be certificate and sealed by citifying agency. 2.3 All test panels should be prepared by govt. testing agency coloured photographs of test panels should be taken before and after the should be enclosed alongwith test report. Sample batch. No. and manufacturers test certificate should ne enclosed alongwith the report. Test reports contain details of observation and rusting if any, as per the testing code. Suggested government laboratories are: RRL, Hayderabad HBTI, Kanpur DMSRDE, Kanpur IIT, Mumbai BIS Laboratory UDCT, Mumbai RITES, Calcutta PDIL 2.4 Manufacturers should intimate the company, details of sample submitted for testing name of Govt. testing agency, date, contact personn el of the Govt. testing agency. At the end of the test the manufacturer should submit the test report t