units horizontal mounting position Types H H H B3-SV16A Bevel-helical gear box B3

Flender/Flender Gear Units/Bevel-helical gear box B3

oil and changing the air filter in the instructions 7, which are part of the complete documentation of the gear unit. More information about individual components can be found in the instructions for the com- ponents in the complete documentation for the gear unit. 6.1.1 Gear units with an oil supply system 6.1 Measures prior to commissioning Implement the following measures before commissioning the gear unit with oil supply sys- tem: Ensure that the maximum permissible pressure in the oil supply system components is not exceeded. Ensure that the maximum permissible temperature of the oil supply system components is not exceeded. Commissioning 6.2 Measures during commissioning 6 Edition 0/2 A5-0 enUsing the oil supply system, lubricate the gear unit for 2 minutes using pre-lubrication phase. During this time, the rolling-contact bearings and gearing are supplied with suffi- cient oil for starting. Ensure that the pre-lubrication phase is not longer than 5 minutes as the oil can foam up at low temperatures. NOTICE Damage to the gear unit caused by inadequate or complete loss of lubrication or in- sufficient cooling The gear unit can sustain damage as result of inadequate or complete loss of cooling or lubrication. Open wide the shutoff valves in the coolant inflow and outflow lines of the coolant system. Check that the connecting pipes are firmly seated and tight. Further information You can find additional information on the oil supply system in the data sheet, in the list of equipment and in the operating instructions for the oil supply system which are included in the complete documentation for the gear unit. 6.2 Measures during commissioning 6.2 Measures during commissioning Take the following measures when commissioning the gear unit and document them: Gear unit with oil supply system: Check that the oil supply system is working properly. Check the oil level. The oil level drops slowly after the gear unit starts up. As the gear unit continues to warm up, the o