Bevel-helical gearbox B2 on Without oil filling Shaft version with reinfo B2-FV-8-D
In stock
SKU
B2-FV-8-D
$546,428.57
Flender/Flender Gear Units/Bevel-helical gearbox B2
nt paints (approx). 9 min. 4-6 hrs. Not applicable Not applicable 1. Temperature resistance 8C 4C 2 5 -1: Specially
for mulated polyamine cured coal tal epoxy sui table for-4C to 1C for application under insulation -1: Two pack cold 
curved epoxy phenolic coating suitable for 4C to 1C for application under insulation -1: Eoxy siloxane anser coat 7 1 
of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 2 
of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 PAINT MATERIALS TABLE NO. 6.4 FINISH PAINTS Sl. No.Description -1 -1 -1 -1 1. Technical name Polyamine cured coal tar epoxy Two-component Epoxy phenolic coating cured with polyamine adduct hardner system (primer + intermediate coat + finish paint) Ambient temperature curing Poly Siloxane coating / High build cold appliedinorganic copolymer based aluminum coating suitable for under insulation coating of CS and SS piping for high temperature service. Two component solvent free type high build epoxy phenolic / novalac epoxy phenolic coating cured with Polyamine adduct hardner system. 2. Type & composition Specially formulated polyamine cured coal tar epoxy suitable for application under insulation Two pack ambient temperature curing epoxy phenolic coating system suitable for application under insulation of CS / SS piping.Amercoat 7 from Ameron Products, USA / Berger 9 from Berger Paints Ltd., or Intertherm 7 CSA from Akzo Nobel coating. Note : 6 Two component solvent free type high build epoxy phenolic / novalac epoxy phenolic coating cured with Polyamine adduct hardner system. 3. Volume Solids (minimum) 7% 6% 6% 9-1% 4. DFT (Dry Film thickness) per coat (minimum) 1Pm 7 - 1 7 - 1 Pm 1- 1 Pm 5. Theoretical covering capacity in M2 / coat / litre (minimum) 5.5 6.5-8.5 6.0-8.0 6.5-8.0 6. Weight per liter in kgs/litre (max paint) (minimum) 1.5 1.7 1.3 1.7 7. Touch dry at 3C (maximum) 4 hrs. 2 hrs. 1| Model Type | Bevel-helical gearbox B2 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 25500.000000 |
| Ratio Range | 1 : 6.3…22.4 |
| Low Speed Output | Flanged shaft |
| Nominal Torque | 23800 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender Industriegetriebe GmbH |
| Country of Manufacture | China |
| Data Sheet & Drawings | Bevel-helical gearbox B2 on Without oil filling Shaft version with reinfo B2-FV-8-D |
Related Products
