B2-DH4-B t sizes to Twostage gear unit sizes to Type Bevel-helical speed reduction gearbox B2

Flender/Flender Gear Units/Bevel-helical speed reduction gearbox B2

n of the process engineering, increasing the availability and demonstration of low-temperature pyrolysis for disposal of selected waste materials Research centre: ASEA Brown Boveri AG Kallstadter Strasse 1,6 Mannheim Government sponsorship: DM 7,4,3 0 Sponsorship ratio: 5% Duration: 0 0 8 - 3 0 8 0 ZH8 Subject: Environmentally relevant investigation of pollutants in pyrolysis oils in comparison with other, industrially used oils Research centre: lnstitut fur Technische und Makromolekulare Chemie der Universitat Hamburg Bundesstrasse 4,2 4 Hamburg Government sponsorship: DM 1,8 0 Sponsorship ratio: 1% Duration: 0 0 8 - 3 0 9 0 ZH8 Subject: Optimisation and expansion of the Hamburg Pyrolysis Process in respect of product spectra and utilisation, feedstocks and emissions, including inspection of the industrial orototype plant Research centre: institut fur Techntsche und Makromolekulare Chemie der Universitat Hamburg Bundesstrasse 4,2 4 Hamburg Government sponsorship: DM 1,7,0 3 Sponsorship ratio: 1% . Duration: 0 0 8 - 3 0 9 0ZH8 subject: Fluidised-bed pyrolysis - testing and demonstration of new disposal technique (plastics pyrolysis) or mixed plastic and rubber waste - Development of feasible jisposal concept Pesearch centre: 4BB Kraftwerke AG (allstadter Strasse 1,6 Mannheim Sovernment sponsorship: DM 5,2,0 1 Sponsorship ratio: 5% 2 1. Purpose of the project While most of the test plants constructed in German and abroad for the pyrolysis of plastics and rubber parts aim only at making use of the calorilcvalue of the waste materials, the work conducted at Hambur University since 1 has been geared to investi ating the suitability of plastic scrap and olc?tyres as sources of raw materials. The sur risinglykgh aromatics yield achieved during yrolysis in the laboratory plant was the reason & upscaling these investiga- tions to pilot pint sponsored by the Federal Ministry of Research and Technology and the Verband Kunststofferzeu