H4-VH-13-D ch allows us to offer the entire drive train inc Helical gear units H4

Flender/Flender Gear Units/Helical gear units H4

format of manufacturers testing laboratory. The sampling shall be certificate and sealed by citifying agency. 2.3 All test panels should be prepared by govt. testing agency coloured photographs of test panels should be taken before and after the test should be enclosed alongwith test report. Sample batch. No. and manufacturers test certificate should ne enclosed alongwith the report. Test reports contain details of observation and rusting if any, as per the testing code. Suggested government laboratories are: RRL, Hayderabad HBTI, Kanpur DMSRDE, Kanpur IIT, Mumbai BIS Laboratory UDCT, Mumbai RITES, Calcutta PDIL 2.4 Manufacturers should intimate the company, details of sample submitted for testing name of Govt. testing agency, date, contact personnel of the Govt. testing agency. At the end of the test the manufacturer should submit the test report to the company for approval. The manufacturer() shall be qualified based on the result of these tests and other assessment and the Companys decision in this regard shall be final and binding on the manufacturer. 9 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 4 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 2.5 Tests required for evaluation of acceptance of coating materials for offshore application. Density 1 Dipping properties 8 Film Characteristics Drying time 1 Flexibility 1/ 5 Hardness 3 Adhesion 2 Abrasion resistance 9/ 1 DFT/ Coat AS PER SSPC GUIDELINES Storage Stability 1 Resistance to Humidity for 2 hrs. 2 Salt Spray for 2 hrs. 1 Accelerated Weathering 8 % Zn in DFT 5 2.6 Coating system for panel test shall be decided after discussion with MECON. 9 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 4 of 5 TITLE MEC/