H4-HH10A or crane applicationshoisting gear Traversing gea Helical gearboxes H4

Flender/Flender Gear Units/Helical gearboxes H4

her information about the technical data can be found in the separate data sheet or in the list of equipment in the complete documentation for the gear unit. B5-0 en Edition 0/2 3Application planning 4 4.1 Scope of delivery 4.1 Scope of delivery The scope of delivery is listed in the shipping documents. Immediately upon receiving the gearbox, check that everything has been delivered. Report any damaged and/or missing parts to Customer Services ( Page immediately. WARNING Serious injury through defective product Serious injury may occur. If the gearbox exhibits any visible damage, you should not put it into operation. 4.2 Transport 4.2 Transport General information The gear unit is delivered fully assembled. Additional items such as shrink disks, couplings, oil coolers, pipework and valves may be delivered separately packaged, as necessary. When transporting the gear unit, observe the following instructions to avoid damaging the gear unit: Always use suitable equipment to transport the gear unit. Transport the gear unit without oil filling and leave it in the transport packaging. Depending on the order specification, the gear unit can be shipped filled with oil. Take the extra weight into account (number of litresx1N) and transport the gear unit in its final mounting position. Do not use incorrect attachment points. The threads in the end faces of the shaft ends may not be used for attaching lifting equip- ment. Do not use the pipework to move the gear unit. Ensure that the lifting equipment is adequately designed to accommodate the weight of the gear unit. Always set the gear unit down onto suitable base. The base must be designed such that there is no risk of damage to the gear unit or its mounted components. Application planning 4.2 Transport 4 Edition 0/2 B5-0 en WARNING Risk of crushing There is risk of being crushed by component that becomes detached because the hoisting gear and load suspension device are not suitable for handling it. When lifting, ple