H4-DV20A Flender GmbH Flender MD Design of the gear un Helical speed reducer H4

Flender/Flender Gear Units/Helical speed reducer H4

information on pressure monitoring in the pressure monitor operating instructions, provided in the complete gear unit documentation. 5.6.7 Connecting the Pt 1 resistance thermometer 5.6 Connecting components Procedure To connect the Pt 1 resistance thermometer, proceed as follows: 1.Check that the Pt 1 resistance thermometer connection is not damaged. 2.Install the electrical wiring between the Pt 1 resistance thermometer and the evalu- ation unit. The customer is responsible for providing the evaluation unit. Further information Further information about the Pt 1 resistance thermometer can be found in the Pt1 res- istance thermometer operating instructions in the complete documentation for the gear unit. Assembly 5.6 Connecting components 5 Edition 0/2 A5-0 en5.6.8 Connecting up the axial load monitoring system 5.6 Connecting components Procedure To connect the axial load monitoring system to the gear unit, proceed as follows: 1.Check that the connection of the axial load monitoring system is not damaged. 2.Install the electrical wiring for the load cell. Further information You can find additional information about the axial load monitoring system in the operating instructions for the axial load monitoring system in the complete documentation for the gear unit. 5.6.9 Connecting the bearing monitoring system 5.6 Connecting components Procedure To connect the bearing monitoring system to the gear unit, proceed as follows: 1.Make sure that the connections provided for holding the bearing monitoring equipment are undamaged. 2.Install the bearing monitoring equipment at the customer' site. Further information You can find additional information about the bearing monitoring system in the operating in- structions for the bearing monitoring system components provided in the complete gear unit documentation. 5.6.1 Connecting speed encoder 5.6 Connecting components Procedure To connect the air-oil cooler to the gear unit, proceed as follows: 1.Ensure that the speed en