H4-DH-8B utdoors No packaging or basic packaging outdoors Helical gear boxes H4

Flender/Flender Gear Units/Helical gear boxes H4

igh) - 4 0 - 1 5 0 9 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 4 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 1.2 Identification of storage tanks The storage tanks shall be marked as detailed in the drawing. 2.0 PAINTING FOR CIVIL DEFENCE REQUIREMENTS 2.1 Following items shall be painted for camouflaging if required by the client. . All columns . All tanks in offsites . Large vessels . Spheres 2.2 Two coats of selected finishing paint as per defence requirement shall be applied in particular pattern as per 2.3 and as per the instructions of Engineer-in-charge. 2.3 Method of Camouflaging 2.3.1 Disruptive painting for camouflaging shall be done in three colours in the ratio of 5:3:2 (all matt finish). Dark Green Light Green Dark Medium Brown 5: 3: 2 2.3.2 The patches should be asymmetrical and irregular. 2.3.3 The patches should be inclined at 3 degree to 6 degree to the horizontal. 2.3.4 The patches should be continuous where two surfaces meet at an angle. 2.3.5 The patches should not coincide with corners. 2.3.6 Slits and holes shall be painted and dark shades. 2.3.7 Width of patches should be 1 to 2 meters. 9 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 4 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 2.0 INSPECTION AND TESTING 2.1 All painting materials including primers and thinners brought to site by contractor for application shall be procured directly from manufacturers as per specifications and shall be accompanied by manufacturers test certificates. Paint formulations without certificates are not acceptable. 2.2 Engineer-in-Charge at his discretion, may call for tests for paint formulations. Contractor shall arrange to have such tests performed including batch