H4-CV-26B SO Only roller bearings from certified suppliers Helical gear Reduction Boxes H4

Flender/Flender Gear Units/Helical gear Reduction Boxes H4

he packaging complies with the HPE Packaging Guidelines . The symbols marked on the packaging must be observed at all times. These have the following meanings: Top Fragile Keep dry Keep cool Centre of gravityUse no hand hookAttach here Fig. 2: Transport symbols 1 / 7BA 5 en 0/2Note The gear unit may only be transported by means of the appropriate transport equipment. During transport the gear unit should be left without oil filling and on the transport packaging. In case of gear units with auxiliary drive, the auxiliary gear unit will be delivered ex works with oil filling. The instructions for the add-on auxiliary drive unit must be observed. NOTICE Property damage Damage to the gear unit is possible when using the wrong attachment points. Use only the eye boltsprovided to attach lifting equipment to the unit. Transporting of the gear unit by attaching it to the pipework is not permitted. The pipework must not be damaged.Do not use the threads in the front sides of the shaft ends to attach slinging and lifting gear for transport. Slinging and lifting gear must be adequate for the weight of the gear unit. Fig. 3: Attachment points NOTICE Property damage Damage to the eye bolts is possible. When slinging to eye bolts, no lateral pull may be created counter to the direction of the ring level, in order to avoid breakage of the eye bolts. 1 / 7BA 5 en 0/2AB4 4 Fig. 4: Tilted and lateral pull with eye bolts Permitted tilting in the direction of the ring level (angle maximally Not permitted lateral pull counter to the direction of the ring level For detailed illustration of the gear unit and the position of the attachment points, please refer to the drawings in the order-specific gear unit documentation. 4.3 Storing the gear unit The gear unit must be stored in sheltered place in the position of the original packaging or in the position of use, placed on vibration-free dry base, and covered over. NOTICE Property damage Any damage to the coating may cause failure o