H2-KH-24B what is flender Helical speed reduction gearbox H2
In stock
SKU
H2-KH-24B
$278,571.43
Flender/Flender Gear Units/Helical speed reduction gearbox H2
are depressurised. Only work on the gear unit when it is stopped. Disconnect electrical systems from the power supply. Safety
instructions 2.5 Special types of danger and personal protective equipment 1 Edition 0/2 A5-0 en DANGER Electric shock Energised parts 
can cause an electric shock. Ensure that the entire plant is de-energised before starting electrical installation work. Protective equipment Wear 
the following personal protective equipment when handling the gear unit: Safety shoes Overalls Helmet Protective gloves Safety glasses WARNING Risk 
of eye injury Small foreign particles such as sand or dust can enter the cover plates of the rotating parts and be hurled back by them. Wear safety glasses. Dangers during operation Damage to the gear unit is possible. Stop the gear unit immediately by switching off the drive aggregate if inexplicable changes are noticed during operation. Such changes may include unusual gear unit noise or in- creased operating temperature. WARNING Risk of falling There is an increased risk of falling when standing or walking on the gear unit during oper- ation. Only walk or stand on the gear unit or its mounted components for maintenance and repair work during gear unit downtime. Do not walk or stand on shaft ends, protective covers, mounted components or pipework. WARNING Danger to life due to rotating or moving parts There is danger that rotating or moving parts may catch hold of you or pull you in. Secure rotating and/or moving parts against contact using safeguards. Surface temperature Depending on operating conditions, the gear unit may reach extreme surface temperatures. Safety instructions 2.5 Special types of danger and personal protective equipment A5-0 en Edition 0/2 1 WARNING Risk of burns Possible risk of serious burn injury from hot surfaces (>5C). Wear appropriate protective gloves and protective clothing. WARNING Danger of scalding Risk of serious injury possible through escaping hot operating media when these are be| Model Type | Helical speed reduction gearbox H2 |
|---|---|
| Gear Type | Helical Gear |
| Weight (kg) | 13000.000000 |
| Ratio Range | 1 : 7.1…22.4 |
| Low Speed Output | Hollow shaft with spline acc. to DIN 5480 |
| Nominal Torque | 725000 Nm |
| Mounting Arrangements | Horizontal mounting position |
| Manufacturer | Flender Corporation |
| Country of Manufacture | Thailand |
| Data Sheet & Drawings | H2-KH-24B what is flender Helical speed reduction gearbox H2 |
Related Products
