Helical speed reduction gearboxes H2 flender tandwielkast H2-HH4A
In stock
SKU
H2-HH4A
$4,071.43
Flender/Flender Gear Units/Helical speed reduction gearboxes H2
5.3 1.1 2-8 8-Bolt1 2 2 5 3.7 2.5 1.2 9 1.7 0.4 6.3 2-8 1 3 3 7.5 5.6
3.7 1.8 8 1.9 7.6 2-8 2 4 5 1 7.5 5 2.5 8 2.1 9.0 2-8 2 5 6 
1.5 1.1 6.7 3.3 7 2.2 1.9 3-8 3 7 8 1.5 1.1 8.7 4.3 6 2.4 1.2 3-8 4 
8 1 2.5 1.1 1.7 5.3 6 2.5 2.9 3-8 5 1 1 2 2 1 7 5 3 2.1 
3-8 7 1 1 3 2 1 9 5 3.3 4 4-8 9 1 2 4.5 3.8 2.2 1.6 5 3.4 4.9 4-8 1 2 3 6 4.7 3.5 1.2 4 2.5 6.3 4-8 1 3 4 8 6 4 2 4 3 7.9 5-8 2 4 5 1 7.5 5 2.5 3 3.4 1 5-8 2 5 6 1 1.2 6.5 3.7 3 3.6 1 6-8 3 7 8 1 1.2 8.5 4.7 3 3.8 1 4-1 1-Bolt2 3 4 8 6 4 2 4 2 0.3 1 4-1 2 4 6 1 8 5 2 3 2.3 1 5-1 3 6 7 1.8 1.6 7.4 3.2 3 2.4 2 6-1 4 7 1 1 1 9 4 3 2.5 2 6-1 6 1 1 2 1 1 6 3 2.7 0.2 4 7-1 7 1 1 3 2 1 7 2 2.8 5 7-1 9 1 2 3 2 1 9 2 3 6 8-1 1 2 3 5 4 2 1 2 3.5 8 9-1 2 3 4 8 6 4 2 2 3.9 1GENERAL 6/8 TORSIONALLY RIGID ALL -STEEL COUPLINGS | -ARPEX ARN-6/-8/-1 SERIES 4 4 5 5 6 6 7 7 8 8 9 9 1 1 1 1 1 1 1 1 APermitted shaft misalignments, types NEN/NHN, BEB, MCECM/MCHCM and MFEFM/MFHFM The permitted shaft misalignments Ka, Kr and Kw are maximum values and must not occur at the same time. The specified axial misalignments apply to the complete coupling. The permissible angular misalignments have been specified per coupling joint. As all -ARPEX types are designed to be double-jointed, there is direct nterrelation between radial and angular misalignment.NEN/NHN: Kr = ( - S tan(Kw) BEB, MCECM/MCHCM and MFEFM/MFHFM: Kr = (LZ + S tan(Kw) To determine the permissible misalignment, values must, if necessary, be converted. Size Permitted angular misalignment Kw 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 DA Permitted axial misalignment Ka in mm 8-6 1.2 1.1 1 0.8 0.7 0.6 0.5 0.4 0.2 0.1 0 1-6 1.4 1.3 1.1 1 0.8 0.7 0.6 0.4 0.3 0.1 0 1-6 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 1-6 2.2 2 1.8 1.5 1.3 1.1 0.9 0.7 0.4 0.2 0 1-6 2.6 2.3 2.1 1.8 1.6 1.3 1 0.8 0.5 0.3 0 1-6 3 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 1-6 3.2 2.9 2.6 2.2 1.9 1.6 1.3 1 0.6 0.3 0 2-6 3.4 3.1 2.7 2.4 2 1.7 1.4 1 0.7 0.3 0 2-6 3.4 3.1 2.7 2.4 2 1.7 1.4 1 0.7| Model Type | Helical speed reduction gearboxes H2 |
|---|---|
| Gear Type | Helical Gear |
| Weight (kg) | 190.000000 |
| Ratio Range | 1 : 6.3…22.4 |
| Low Speed Output | Hollow shaft with keyway acc. to DIN 6885/1 |
| Nominal Torque | 6700 Nm |
| Mounting Arrangements | Horizontal mounting position |
| Manufacturer | Flender Macneill Gears Ltd. |
| Country of Manufacture | Syria |
| Data Sheet & Drawings | Helical speed reduction gearboxes H2 flender tandwielkast H2-HH4A |
Related Products
