H2-FV-16B flender bevel helical gearbox catalogue Helical speed reduction gearbox H2

Flender/Flender Gear Units/Helical speed reduction gearbox H2

bility of the structure. Tests shall be based on ANSI BI FMA X5.5 -2 standards applied proposed product solution. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Control & Instru mentation (&) Chapter-0.0 2, MECON Limited, All Right Reserved Page 1 of 1 The EPD (Environmental product eclaration) of console shall be verified in accordance with ISO 1 (from UL/Intertek) for Impacts on env ironment by console. Table top: - The material of the working surface shall be minim um 2 mm thick MDF with High Pressure ANSI/NEMA LD3 certified scratch-resistan laminate.The proposed console' li fe cycle should be assessed (from approved LCA consultant) for environmental impacts associated with all he stages of product' life for cradle to grave analysis. [] Colour Coordination Tenderer shall ensure full co-ord ination of the colour of vario us components of the control room in consultation with client/consultant for Natural Gas compressor control room viz. walls, ceiling, floo Vitrified-Hi ghlighter ), control desk & other furniture, which shall be aesthetically ap pealing. comprehensive proposal for the colour coordination shall be fur nished to Client/Consultant during detaile engineering for approval The Tenderer must pay particular attention in the positioning desk mounted TFT' and large video screens in relation to control room light ing in order to minimize reflections 0.0.0 Miscellaneous Requirement . Safety Requirement All the equipment in PLC shall be located in general purpose no -hazardous area, normally in control room. However, transmitters, process switches and final control elements shall be located in the field and shall be specified as per the electrical area classifications. Intrinsically safe certifi ed transmitters shall be used if located in hazardous