Flender/Flender Gear Units/Helical gear reducer H2
ath or severe physical injury will occur if the relevant precautionary meas- ures are not taken. WARNING means that death
or severe physical injury may occur if the relevant precautionary meas- ures are not taken. CAUTION means that mild physical 
injury may occur if the relevant precautionary measures are not taken. NOTICE means that damage to property may occur if 
the relevant precautionary measures are not taken. If multiple hazard classes come into play, the warning for the highest level 
in question shall always be used. If warning containing the warning triangle warns of harm to individuals, the same warning may also include warning regarding damage to property. Information Information Information offers additional notes, assistance and tips for handling the product. Introduction 1.2 General information 1 Edition 0/2 A5-0 enQualified personnel The product/system associated with this documentation may only be used by qualified per- sonnel trained to perform the relevant tasks, taking into account the associated documenta- tion for the relevant tasks, particularly the safety information and warnings included therein. Due to their qualification and experience, qualified personnel are capable of detecting risks and avoiding potential hazards when dealing with these products/systems. Intended use of Flender products Please note the following: WARNING Flender products are only suitable for the uses set out in the catalogue and associated technical documentation. If third-party products and components are used, these must be recommended and/or authorised by Flender. Safe and flawless operation of the products requires proper transport, proper storage, setup, assembly, installation, commissioning, operation and maintenance. The permissible environmental conditions must be adhered to. Instructions in the associated documentation must be followed. Trademarks All designations marked with the trademark symbol are registered trademarks of Flender GmbH. Other designati| Model Type | Helical gear reducer H2 |
|---|---|
| Gear Type | Helical Gear |
| Weight (kg) | 128.000000 |
| Ratio Range | 1 : 6.3...22.4 |
| Low Speed Output | Flanged shaft |
| Nominal Torque | 3500 Nm |
| Mounting Arrangements | Horizontal mounting position |
| Manufacturer | Siemens AG |
| Country of Manufacture | China |
| Data Sheet & Drawings | H2-FH3-B flender türkiye Helical gear reducer H2 |
Related Products
