H1-KV-9-D flender arpex ars 6 Helical speed reduction gearbox H1

Flender/Flender Gear Units/Helical speed reduction gearbox H1

.0 Mountin Wall / column mountin . 8.0 Inscription Inscription plate shall be provided indicating the voltage and current rating of the switch socket outlet. 9.0 Miscellaneous In hazardous area, flame proof switch socket outlet shall be provided. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, MECON Limited, All Right Reserved Pag 1 of 2 1.0 2 SINGLE/ DOUBLE PO LE SWITCHES (For use at Shop Floors) 1.0 Application The switches are intended for controlling lighting circuits. 2.0 ype Weather and dustproof and industrial ype. 3.0 Design The rotary or toggl switches provided shall be of sturd design. 4.0 Standar As per IS : 6 (Part- 1. 5.0 Housing The unit shall be housed in cast iron or cast aluminium box having gasketted, screwed front cover plate, fixing lugs and suitable provision for terminating conduit/cable at the top, bottom or sides as specified. 6.0 Mounting DIN Channel mounting. Single phase MCBs mount ed adjacent to each other and connected to di fferent phases shall be provided with adequate ins ulated phase barriers. 7.0 Terminal suitability Terminals suitable for aluminium condu ctor cables. 1.0. Lighting Fixtures and Accessories 0 All the luminaires shall be designed, manufactured and tested in accordance with the Indian Standards as far as they are applicable. 0 All the luminaires shall be industrial type with LED with mini mum burning time of 5,0 hours with no toxic content with colour temperature ( CT)>=5 - 4K & CRI above 8.Power factor shall be more than 0.9 and driver eff iciency more than 8%.Junction Temperature shall be kept as low as possible so as to increase performance and life time