oil is directed through the cooler during operatio B4KH-19-C Bevel-helical gear Reduction Box B4

In stock
SKU
B4KH-19-C
$145,714.29

Flender/Flender Gear Units/Bevel-helical gear Reduction Box B4

usking and splitting. The combined effect of both these factors is denoted as dehulling effectiveness . However, there are various denitions available for dehulling efciency 4 Sokhansanj and Patil Table 8 Dehulling Characteristics of Grain Legumes Dehulling Intact Legume Yield(%)aefciencybseedsc Soybean 8.7 0.7 9.3 Fababean 8.3 0.7 5.9 Field pea 8.3 0.6 4.6Lentil 8.4 0.5 9.2Kidney bean 8.2 0.5 0.0Mung bean 7.2 0.3 1.1Black-eyed cowpea 7.6 0.2 1.7 Brown cowpea 7.3 0.1 1.3 aThe yield of dehulled grain when at least 9% of the hull has been re- moved from the seed. bDehulling efciency /H1[hull removed (/1 seed)]/[1 /H1yield (1 seed)]. cThe weight percentage of seeds that have both cotyledons bound together after dehulling. Source : Ref. 1. based on the importance of the operation for particular pulse, as well as its end use. The commonly adopted denitions follow. The dehulling characteristics of different pulsesare given subsequently in Table 8. 4.1 Denitions of Dehulling Efciency The dehulling efciency is dened by two expressions, dehulling effectiveness and quality of dehulling (: hulling/H1/H2/H1n1 n2/H2( where Ehulling/H1effectiveness of dehulling n1,n2/H1mass of unhulled grains after and before hulling The quality of dehulling is dened as Ewk/H1k2/H1k1 (k2/H1k/H1(d2/H1d/H1(m2/H1m( where Ewk/H1quality of dehulling k1,k2/H1mass of whole split kernels before and after hulling d1,d2/H1mass of crushed kernels before and after hulling m1,m2/H1mass of mealy waste before and after hulling The overall dehulling efciency ( ) is then dened by Eq. (: /H1Ehulling/H1Ewk ( Dehulling and Splitting Pulses 4 The dehulling efciency is given in terms of the following denitions (: 1. The degree of dehusking (or dehulling), Edh, more than 7% of the surface area of unsplit or split grain was without hull: Edh/H1m1/H1m2 M1/H1M2( where m1andm2/H1mass of dehulled splits and unsplit grain M1andM2/H1mass of total split and unsplit grain 2. Yield of dal, Yd, is consider
More Information
Model Type Bevel-helical gear Reduction Box B4
Gear Type Bevel Helical Gear
Weight (kg) 6800.000000
Ratio Range 1 : 80…315
Low Speed Output Hollow shaft with spline acc. to DIN 5480
Nominal Torque 300000 Nm
Mounting Arrangements Horizontal mounting position
Manufacturer Beijing Flender
Country of Manufacture Malta
Data Sheet & Drawings oil is directed through the cooler during operatio B4KH-19-C Bevel-helical gear Reduction Box B4