Bevel-helical gear reducers B4 t LSS For specifying the direction of rotation f B4FH-21-C
In stock
SKU
B4FH-21-C
$197,142.86
Flender/Flender Gear Units/Bevel-helical gear reducers B4
with zic tetroxy choromate. Tow component polyamide cured epoxy resin medium, pigmented with zinc phosphate. 3. Volume solids (approx) 4%
7-8% 4% 4. DFT (Dry dilm thickness) per coat (approx) 4-5 8-1 4-5 5. Theoretical covering capacity in M2/ coat/ 
litre (approx) 8-1 8-1 8-1 6. Welght per litre in kgs/ litre (approx) 1.3 1.2 1.4 7. Touch dry at 
3 (approx) 3 minutes 2 hrs. After 3 mins. 8. Hard dry at 3 (approx) Min.: 8 hrs. Max.: no 
limitation Min.: 2 hrs. Max.: 2 hrs. Min.: 8 hrs. Max.: 3-6 months 9. Over Coating Interval (approx.) Min : 8 hrs Max : No limitation Min : 4.6 hrs Max : 2 hrs Min : 8 hrs Max : 3-6 months 1. Pot life (approx) at 3 for two component paints (approx). Not applicable Not applicable 8 hrs. 1. Temperature Resistance 6C Not applicable 8C 9 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 1 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 PAINT MATERIALS TABLE NO.: 6.2FINISH PAINT . No DESCRIPTION -2 -3 -6 -7 1. Technical Name Acrylic polyurethane finish paint Chlorinated rubber based finish paint Epoxy-High build finish paint High build coaltar epoxy coating. 2. Type and composition Two-pack aliphatic isocynate cured acrylic finish paint Single pack plasticised chlorinated rubber based medium with chemical and weather resistant pigments. Tow- pack polyamide/ ployamine cured epoxy resin medium suitable pigmented. Tow pack polyamide cured epoxy resin blended with coal/ tar medium, suitably pigmented. 3. Volume solids (approx) 4% 4% 6% 6% 4. DFT (Dry film thickness) per coat (approx) 3-4 4-5 1-1 1-1 5. Theoretical covering capacity in M2/ coat/ litre (approx) 1-1 8-1 5-6 5-2-6.5 6. Welght per litre in kgs/ litre (approx) 1.3 1.2 1.4 1.5 7. Touch dry at 3 (approx) 1 hrs. 3 minutes 3 hrs. 4 hrs. 8. Hard dry at 3 (approx) Overnight 8 hrs. Overnight 4 hrs. 9. Overcoating interval (approx) Min| Model Type | Bevel-helical gear reducers B4 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 9200.000000 |
| Ratio Range | 1 : 80…315 |
| Low Speed Output | Flanged shaft |
| Nominal Torque | 420000 Nm |
| Mounting Arrangements | Horizontal mounting position |
| Manufacturer | A. Friedr. Flender GmbH |
| Country of Manufacture | Germany |
| Data Sheet & Drawings | Bevel-helical gear reducers B4 t LSS For specifying the direction of rotation f B4FH-21-C |
Related Products
