Bevel-helical gear boxes B4 s details acc to orderrelated documentation Back B4-FH-24-D

Flender/Flender Gear Units/Bevel-helical gear boxes B4

work. Please note the following: Ensure adequate ventilation. Do not smoke. 5.2 Unpacking the gear unit 5.2 Unpacking the gear unit Introduction The scope of delivery is listed in the shipping documents. WARNING Severe injury caused by the content of the packing sliding There is risk of being crushed when opening the packing in which the part is transported. While being transported, the content of the packing can slide. Carefully open the packing. Wear suitable protective equipment (gloves, safety goggles). Assembly 5.3 Gear unit assembly A5-0 en Edition 0/2 3 WARNING Risk of serious injury due to defective product defective gear unit can result in serious injury. Do not put the gear unit into operation if any damage is visible. Contact Customer Services ( Page . Requirements Check that everything has been delivered immediately upon receipt. NOTICE Damage to the gear unit due to corrosion Exposing the gear unit to moisture can result in damage from corrosion. Do not damage or open the packaging prematurely if the packaging is designed to pre- serve the unit. Procedure To unpack and use the gear unit, please proceed as follows: 1.Remove packaging and transport devices in accordance with regulations. 2.Perform visual inspection for damage and accumulations of dirt. 3.Immediately report any damaged and/or missing parts to Customer Services ( Page . 4.Dispose of packaging material and transport devices in accordance with regulations. 5.3 Gear unit assembly 5.3 Gear unit assembly 5.3.1 Foundation 5.3 Gear unit assembly Properties of the foundation The foundation must have the following properties: Horizontal and level Stable The foundation must be designed for torsional rigidity Reaction forces from the gear unit must be braced Requirements of the foundation The foundation must meet the following requirements: Assembly 5.3 Gear unit assembly 4 Edition 0/2 A5-0 enConstruct the foundation in such way that it does not produce any resonance vibra- tions and that it