Bevel-helical gear boxes B4 of the Article No to Z and order code Arti B4-DH12-B

Flender/Flender Gear Units/Bevel-helical gear boxes B4

TURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, MECON Limited, All Right Reserved Pag 2 of 2 (Part ) 1 - Single core armoured cables shall be provided with non-magnetic armour consisting of hard drawn round aluminium wires. 1.0 Outer sheath - For armoured/ unarmoured cables tough outer sheath of PVC compound (Type ST2 as per IS . - Black in colour . 1.0 Temp. rise Shall be limited to 9 deg.. 1.0 Cable & Core identification Cable identification shall be provided by embossing on the outer sheath the following: Manufacturers name & trade mark Voltage grade Year of manufacture Type of insulation , , for phases. Black for neutral (fourth core) ) Control Cable For control circuits, PVC insulated and FRLS PVC sheathed multi -core cables with copper conductors having minimum cross-sectional area of 2.5 sq.mm er core shall be used. The number of cores may be standardiz ed as 2,3,4,5,7, 1,1,1,2.Ea ch core of control cable with 7 core and above shall be numbered at every 1 meter intervals. In multi-core control cables, the following minimum reserve cores shall be kept at the engineering stage; 7 - Up to 1 cores - Two reserve cores Up to 1,1 cores & above - Three reserve cores Sequential length marking shall be provided in outer sheath of all power and control cables. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, MECON Limited, All Right Reserved