Bevel-helical speed reduction gearbox B3 exact dimensions if applicable Flender GmbH F B3-VV-10B

Flender/Flender Gear Units/Bevel-helical speed reduction gearbox B3

or minimum fitting spaces without having to sacrifice the advantages of the two-joint coupling. It is thus possible to compensate for both axial and angular as well as radial misalignment. By using half-shell clamping hubs, the coupling can be radially freely dismounted. Power is ransmitted via hexagon socket head cap screws and close-fitting bolts with nuts and ring plate packs in hexa-gonal design. Torques of between 1 and 6 Nm can be transmitted at permitted angular misalignment of 0.7.Main areas of application for the ARF-6 series: ilm stretching machines achines in the cellulose industry achines in confined fitting situationsCoupling suitable for use in potentially explosive atmospheres. Complies with the current ATEX Directive for: II2GExhIICT6...T2GbX II2DExhIIICT8C...2CDbX IM2ExhMbXSERIES ARPEX ARF-6 6/3 TORSIONALLY RIGID ALL -STEEL COUPLINGS | ARPEX ARF-6 SERIES 4 4 5 5 6 6 7 7 8 8 9 9 1 1 1 1 1 1 1 1 Split hub Plate pa ck unit G_MD1_EN_0aHexagon so cket head cap scre wHexagon so cket head cap scre Hexagon so cket head cap scre wDesign and configurations The two plate packs form unit with the adapter disk and are screwed together with close-fitting bolts and nuts at three points. The alternate connection of this intermediate unit with the flanges of the split coupling hubs is achieved by means of short hexagon socket head cap screws at further three points. The hubs are designed as axially slit clamping hubs with half-shell. For larger bores these can be manufactured as jumbo hubs. Optionally, the hubs are also available without parallel keyway. Variants of the ARF coupling Type Description GG Variant with 2 standard clamping hubs GJ Variant with 1 jumbo clamping hub for large bore diametersThe article number can be obtained with the help of the Configurator. The coupling can be selected in product configurator and specified using selection menus. The Configurator is available under flender speed reducersThe coupling can be selected via