Bevel-helical gearbox B3 n h hEn n al G c g e E dH H LP H M LP B3-SH-20-D

Flender/Flender Gear Units/Bevel-helical gearbox B3

ocumentation supplied with the gear unit. The complete documentation encompasses other documents, including: Data sheet List of equipment Dimension drawing Instructions 7 on gear unit lubrication and preservation Instructions for mounted components Instructions for third-party devices Copyright The copyright for these instructions is held by Flender. Without the authorisation of Flender, these instructions may not be used wholly or in parts for competitors purposes or be given to third parties. If you have any technical queries, please contact the Customer Services address (Page . Introduction 1.3 Lubricants 1 Edition 0/2 A5-0 en1.3 Lubricants 1.3 Lubricants The quality of the oil used must meet the requirements of the instructions7, which is provided as separate item, otherwise the warranty provided by Flender will be void. Flen- derurgently recommends that one of the oil types listed in instructions 7, which have been appropriately tested and comply with the requirements, is used. To avoid misunderstandings, Flender points out that, by making this recommendation, it is not approving the product in the sense of expressing warranty for the quality of the lubric- ants supplied by your supplier. Every lubricant manufacturer is required to guarantee the quality of his/her products. Information such as oil type, oil viscosity and required oil quantity can be found on the rating plate of the gear unit and in the documentation supplied with the gear unit. The oil quantity specified on the rating plate is an approximate value. The actual quantity of oil required is determined by the marking on the oil dipstick or oil sight glass. The instructions for the current lubricant recommendations of Flender can also be viewed on the Internet ( https:// Germany flender HB series gearbox /lubricants ). The oils listed there undergo continuous testing. As result, the recommended oil types might in future be removed from the list or replaced by more advanced oils. Flender recommends regular inspectio