ontinued Data position of the Article No to B3-HV-9-D Bevel-helical gear Reduction Boxes B3

In stock
SKU
B3-HV-9-D
$19,285.71

Flender/Flender Gear Units/Bevel-helical gear Reduction Boxes B3

r as minimum requirement shall designate/deploy the following to co-ordinate the above: No. Of workers deployed Up to 2 - Designate one safety supervisor who will guide the workers from time to time, as well as impart training basic guidelines at least weekly once. 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 2 of 5 TITLE MEC//0/2/6 REVISION : 0 HEALTH, SAFETY AND ENVIRONMENT (HSE) MANAGEMENT EDITION : 1 Above 2 & upto 5 - Deploy one qualified and experienced afety Engineer/ Officer who will guide the workers from time to time as well as impart basic guideline & training at least weekly once. He / She shall possess recognized Degree in any branch of engineering or technology or architecture and had post qualification construction experience of minimum two years or possess recognized Diploma in any branch of engineering or technology or Graduate in Science stream and had post qualification construction experience of minimum five years. Above 5 - One additional safety engineer/Officer (for every 5 or less) whose function will be as mentioned above Contractor shall indemnify and hold harmless OWNER/ MECON & their representatives from any and all liabilities arising out of non fulfillment of HSE requirements. Above is the minimum requirement and the Contractor shall ensure physical presence of safety personnel at each place where Hot work per mit is required. No work shall be started at site until above safety personnel are physically present at site. The contractor shall submit safety organogram clearly indicating the lines of responsibility and reporting system. He shall furnish Bio-Data/Resume/Curriculum Vitae of the safety personnel he intends to mobilize, at least 1 month before the intended mobilization, for MECON/Owner' approval. 3.1.4 The Contractor shall ensure that the Health, Safety and Environment (HSE) requirements are clearly understood & fa
More Information
Model Type Bevel-helical gear Reduction Boxes B3
Gear Type Bevel Helical Gear
Weight (kg) 900.000000
Ratio Range 1 : 12.5…71
Low Speed Output Hollow shaft with keyway acc. to DIN 6885/1
Nominal Torque 35700 Nm
Mounting Arrangements Vertical mounting position
Manufacturer Flender France S.A.R.L.
Country of Manufacture Cambodia
Data Sheet & Drawings ontinued Data position of the Article No to B3-HV-9-D Bevel-helical gear Reduction Boxes B3