Variantsshaft arrangement looking at side Type B3-HV-10B Bevel-helical gearbox B3
In stock
SKU
B3-HV-10B
$19,928.57
Flender/Flender Gear Units/Bevel-helical gearbox B3
r bag with oxygen inlet connection, non- return, non-breathing human valve. . The bag shall be made of good quality
natural rubber. The bag shall be adequately reinforced at the neck of uniform thickness. . Metallic parts shall be plated 
nickel. Chromium. . The facemask shall have male conical fittings of the adult size. . The inlet shall be provided 
for connection to an oxygen source. In accordance of Service, when the bag is pressed, air shall flow to the 
patient through the valve and the facemask. When the bag is released, the valve shall open towards outside and expiration shall take place with least resistance. Air shall automatically fill in the bag. The valve at any stage shall not stick. The tube shall have an additional arrangement for preventing air to escape into the atmosphere when the bag is squeezed. The Resuscitator shall confirm to IS-6-1 RA- 2, shall bear the IS mark. The various parts of the unit shall be packed in strong/ sturdy carry case. The respirator shall be marked with the manufacturers name / trademark on the bag. 5.1 Electrical Siren ( Range 3.0 KMS ) The Electrical Siren used for firefighting & general purposes shall be supplied complying to IS:1-1-RA2 (Part ) Siren shall consist of 3 phase electric motor, siren head. ) Starter for on/off operations. 1 of 1 TECHNICAL SPECIFICATION FOR PORTABLE EXTINGUISHERS & FIRE FIGHTING EQUIPMENT ) Shall match to the Power rating 3 phase, not > 3.7kw, 5Hz, 4 volts. ) Acoustic power out put shall comply with IS. ) The Siren shall have minimum range of 3.0 Kms. ) Shall be suitable for the power line specification available in the state of TamilNadu. ) Siren shall be horizontal mounting type complete with base fittings. ) The electric motor shall be enclosed totally, with sealed greased ball bearing system and shall conform to IS: 3. ) The operation controls shall be available both at local point & central locations. ) The sir| Model Type | Bevel-helical gearbox B3 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 930.000000 |
| Ratio Range | 1 : 16…90 |
| Low Speed Output | Hollow shaft with keyway acc. to DIN 6885/1 |
| Nominal Torque | 43800 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender Ibérica S.A. |
| Country of Manufacture | China |
| Data Sheet & Drawings | Variantsshaft arrangement looking at side Type B3-HV-10B Bevel-helical gearbox B3 |
Related Products
