or crane applications sizes to PP Pn Pt ttn t B2SV-12-C Bevel-helical gear reducers B2

Flender/Flender Gear Units/Bevel-helical gear reducers B2

litate easy maintenan ce and heat dissipation. The panels shall be suitable for use in outdoor open location and shall have IP-5 degree of protection. They shall referably be provided with integral canopy can be accepted. The separate canopy shall be made of at least 1 SWG (2mm) galvanised sheet steel or FRP. The canopy shall be suitable for providing protection against rain from top and two sides. The lighting and power panels shall be provided with gaskets made of non-in flammable and self-extin guishin material. 2.0 Painting The enclosures shall be treated and prepared for painting with two coats of epoxy paint with final colour shade both internal and external) as below: - Flame proof (Gas group IIA/IIB) : Dark admiralty grey shade 6 of IS -5 - Flame proof (Gas group IIC) : Light yellow shade 3 of IS-5 3.0 Inscription /Caution Marking warning inscription Isolate power supply elsewhere before opening shall be provided on each enclosure. The warnin inscription 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, MECON Limited, All Right Reserved Pag 1 of 2 shall be embossed on the enclosure or separate warning plate with above inscription shall be fixed to the encl osure with screws. The warning plate shall be of nickel plated brass or stainless steel. 1.0 Control oom Switchboard 1.0 Locatio Control room for controllin the li ghting fixtures 2.0 ype Flush mounted ype 3.0 Construction Fabricated from 1 SWG MS sheet with 6mm thick bakelite cover Shall have conduct knockouts on the sides. 4.0 Switch mechanism Modular switches shall be provide 5.0 Power source The switchboards shall be fed from SLDB of respective area. 1.0