lues a recalculation provides the basis for Flen B2SV-10-C Bevel-helical gear box B2

Flender/Flender Gear Units/Bevel-helical gear box B2

linings andreassemble. Reset as previously described under setting. WARNING It is likely that the Brake Lining may contain asbestos and suitable precautions should be taken to avoid breathing in the dust, protective clothing should beworn. Hands should be washed immediately after handling components and olddiscarded parts or linings should be disposed of in responsible manner in linewith local or national regulations covering the disposal of asbestos waste. ANNUALLY: LOADER WORM REDUCTION GEAR UNIT RENOLD Drain and clean out the gear case and refill with Total Carter EP3, Total Carter EPHT3 or Total Carter SY3 or equivalent. (EPHT and SY3 are SyntheticOils). Mineral and Synthetic oils and are incompatible and will not mix, neither willdifferent makes of Synthetic Oils. If in doubt thoroughly flush out the unit prior torefilling. When running conditions are severe the oil should be changed morefrequently. (Capacity: 2.9 Litres). LOADER WINCH GEAR BOX (FLENDER) Drain and clean out the gear case and refill with Total Carter EPHT4 or Total Carter SY4 or ICI Tribol 8-ISO4 or BP Enersyn SG-XP4 or equivalent. These are Synthetic Oils, Mineral and Synthetic Oils are incompatible and will notmix, neither will different makes of Synthetic Oils. If indoubt thoroughly flush out theunit prior to refilling. When running conditions are severe this procedure should beadopted more frequently. (Approximate Capacity: 3.0 litres) NOTE Electrical cables particularly those with copper conductors suffer from condition known as relaxation which may cause wiring to work loose over period of time, it is recommended that the tightness of wiring connections and terminals are checked following the first month in service. LUBRICATION CHART OPERATING AND MAINTENANCE MANUAL SECTION 4 MIXER SPARE PARTS RP2XD GENERAL ARRANG