Bevel-helical gear reducers B2 to the high speed shaft HSS without fan For the B2HH-7-C
In stock
SKU
B2HH-7-C
$21,857.14
Flender/Flender Gear Units/Bevel-helical gear reducers B2
mming & Doc umentation Facility The engineering / programmer stations shall be provided for . On-line configuration and tuning of
control system ii. On-line program development / modification in HMI system. In addition, latest state-of-the- rt workstation based system ocumentation 
facility shall be provided to retrieve, generate & document all system ocumentation for the complete plant. Communication System The data 
communication system shall be provided for communicati on between control system and HMI system as well as communication & signal 
exchange with each system / sub-system of PLC. Integral Sequence of Event Recording The sequence of event monitoring evice shall be provided to guarantee the chronological recording of the eve nts relative to the plant. Th time resolution for this function must be 1 mille second or better. The Sequence of Event Recording System shall provided the operators with time-tagged log of ll conditions which can directly trip Compressors and its auxiliaries as well as ot her conditions which require better time resolution han the standard alarm printer offers. System Diagnostic Station Proper system diagnostic facility shall be provided for automat recording of any system disturban ces and enhancing the system availability. All types of faults and disturbances in all modules used in the sys tem shall be automatically displa yed and printed. Interfacing with PLC Stati on & Corporate Network Necessary interface shall be provided to transfer information rom the Control System of compressors to the Gas compressor PLC & Corporate network in an efficient manner. Each interface shall be redundant. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Control & Instru mentation (&) Chapter-0.0 2, MECON Limited, All Right Reserved Page 8 of 1 Synchroni| Model Type | Bevel-helical gear reducers B2 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 1020.000000 |
| Ratio Range | 1 : 5…18 |
| Low Speed Output | Hollow shaft with keyway acc. to DIN 6885/1 |
| Nominal Torque | 19000 Nm |
| Mounting Arrangements | Horizontal mounting position |
| Manufacturer | Siemens Industriegetriebe GmbH |
| Country of Manufacture | Germany |
| Data Sheet & Drawings | Bevel-helical gear reducers B2 to the high speed shaft HSS without fan For the B2HH-7-C |
Related Products
