Bevel-helical gearboxes B2 J iN J The mass moments of inertia J in kgm ar B2HH-10-C

Flender/Flender Gear Units/Bevel-helical gearboxes B2

monitors, volumetric flow monitors), 2nd motor pump group, oil tank, cooling water flow regulator, vibration damper, etc. For applications with maximum plant availability, the minimum options of double changeover filter, 2nd motor pump and elec- tronic monitoring are recommended. This can be installed next to the gear unit or, depending on the job and installation situation, on the sides or top. The cooling and lubrication systems can be designed for the required, cooling capacity to be dissipated. Please contact Flender. Example: H2SV0 with OLGE 1, side-mounted Example: B3SV1 with OLGE 1, top-mountedG_MD2_XX_0 G_MD2_XX_0 G_MD2_XX_0 Flender GmbH 2NER GROUP CO.,LIMITED Germany sogears HB series gearbox 1/1 Flender MD 2.1 2Options for operation Cooling Additional cooling options Overview (continued) Fan attachment options (please contact Flender) Axial fan (dependent on direction of rotation, changed fan guard contour), exclusively for bevel helical gear units for increased cooling output compared to the standard radial fanWith bevel helical gear units, it is possible to attach fan on the extended, first intermediate shaft. Example: B3SH1 with backstop and axial fan Alternatively, other attachment options are possible for the standard radial fan: Example: H3SH1 with fan opposite of drive spigots If it is not possible to attach the fan on the high speed shaft, the fan can also be attached on the opposite side.Example: B3DH1 with fan on brought out intermediate shaft Example: H3SV1 Lantern with integrated fan It is possible to attach the fan on the high speed shaft in the motor lantern. The cooling performance may be somewhat less compared to standard fan.G_MD2_XX_0G_MD2_XX_0 G_MD2_XX_0 G_MD2_XX_0 Flender GmbH 2NER GROUP CO.,LIMITED Germany sogears HB series gearbox 1/1 Flender MD 2.1 2 1Options for operation Heating Heating elements Overview The materials used in gear unit, comprised of wide variety of components and lubricants, require defined boundary condi- tions to ensure proper