low speed shaft LSS gear unit sizes to Technical B2-VV-6-D Bevel-helical gear boxes B2
In stock
SKU
B2-VV-6-D
$13,392.86
Flender/Flender Gear Units/Bevel-helical gear boxes B2
lz Relay Buchholz relays shall be double float relay as per IS 3. Shu off valves shall be provided on
either sides the buchholz relay. Potential free, self reset inde pendent alarm and trip contacts rated to make, break and 
carry 2 amps at 1 DC shall be provided. No auxiliary re lay shall be used to multiply the contac 
ts. Contacts are to be wired to the marsh alling box. Cooling The cooling system provided sha ll be as 
per the data sheet. Radiators shall be detachable type directly mounted and shall ave flexible earthing arrangement. Bolted, gask etted and flanged connections shall be used for connecting the radiators to the tank. Additional spare radiator fin shall be provided along with isolation valves. The following accessories shall be provided for each radiator/ adiator bank. Top and bottom shut off valves and blanking plates Bottom drain plug and top filli ng plug, air release plug Lifting lugs Neutral bushing CTs Thermometer pockets with thermometers in the inlet and outlet ipes (for separately mounted adiator banks). Top and bottom filter valves for ach separately mounted radiat or bank. Pressure reducing device with alarm and trip . Air release devices Earthing arrangement Bi-directional rollers/rails Rail for transportation with provision for extension for HT sta tion transformer Spare radiator fins al ong with isolation valves Any other accessories required. Valves and connections Valves shall be of sluice type with hand wheels. They shall be made of gun metal and shall be provided with padlocking facility to lock in close /open position, blanking plates or screwed plugs and clear indication of open nd closed position. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0| Model Type | Bevel-helical gear boxes B2 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 625.000000 |
| Ratio Range | 1 : 6.3…22.4 |
| Low Speed Output | Solid shaft with parallel key acc. to DIN 6885/1 with reinforced spigot |
| Nominal Torque | 12000 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender..Ltd China(Tianjin) |
| Country of Manufacture | North Macedonia |
| Data Sheet & Drawings | low speed shaft LSS gear unit sizes to Technical B2-VV-6-D Bevel-helical gear boxes B2 |
Related Products
