ced lubrication required for horizontal gear units B2-SV-17-A Bevel-helical gear unit B2

Flender/Flender Gear Units/Bevel-helical gear unit B2

llation 1 6.2 Drives with foot mounting 1 6.2.1 Foundation 1 6.2.2 Installation of gear units with foot mounting 2 6.3 Drives with foot-/flange 2 6.4 Drives with flange fixture 2.4.1 -type flange-mounted design 2 6.4.2 -type housing-flange-mounted design 2 BA G2 EN 0.0 3 / 4.5 Installation of input drive and output drive elements on gear unit shafts 2 6.6 Attachment of standard motors 2.6.1 Attachment to bell housing with torsionally flexible coupling 2 6.6.2 Attachment to coupling lantern with clamping ring 2 6.7 Motor base plate 2 6.7.1 IEC Motor frame size up to 1 2 6.7.2 IEC Motor frame size 1 to 2 2 6.7.3 IEC Motor frame size 2 2 7. Startup 2 7.1 Measures before startup 2.1.1 Oil level check 2 7.1.1.1 Checking the oil level in the gear unit housing 2 7.1.1.2 Oil sight glass (Special feature) 2.1.1.3 Dipstick (Special feature) 2 7.1.2 Startup without long term preservation 2 7.1.3 Startup in case of long term preservation 2.1.3.1 Long term preservation up to 1 months 2 7.1.3.2 Long term preservation up to 3 months 2 7.1.4 Filling with lubricant 2 7.1.5 Drive with backstop 2 7.2 Shutdown 2 7.3 Preservation with gear oil 2.4 External preservation procedure 2 8. Operation 2 9. Disturbances, reasons and remedy 3. Maintenance and repair 3 1.1 General information on maintenance 3 1.2 Description of maintenance and repairs 3 1.2.1 Perform oil change or oil flushing 3.2.2 Relubricating the anti-friction bearings in drive units 3 1.2.3 Clean ventilator filter 3 1.2.4 Clean drive 3 1.2.5 Checking all fixing screws for tightness 3.2.6 Inspection of the drive 3 1.3 Lubricants 3 1. Spare parts stock, service addresses 3 1.1 Stocking spare parts 3 1.2 Spare parts and Customer Service addresses 3 FLENDER TBINGEN GMBH Germany 3 FLENDER TBINGEN GMBH Europe 3 FLENDER TBINGEN GMBH International 4 1. Declaration by the manufacturer 4 BA G2 EN 0.0 4 / 4. General notes 1.1 General These Operating Instructions constitute part of the gear unit shipment and should be kept in the immedia