H4VV-15-C al gear units probably already includes the right Helical speed reducer H4
In stock
SKU
H4VV-15-C
$30,000.00
Flender/Flender Gear Units/Helical speed reducer H4
GE TO PROPERTY, PERSONNEL OR THE MACHINE IF FAILURE IS BROUGHT ABOUT DUE TO SUCH MODIFICATIONS, OR THE FITMENT OF
SPURIOUS PARTS. RP2XD OPERATIONAL AND SAFETY REQUIREMENTS PRE-DELIVERY 1.1 Drive coupling alignments, pan and star meshing of pan rack and 
drive gear. 1.2 Operating clearances star blade to pan. Fixed blade to pan wall. 1.3 Discharge blade to pan base. 
1.4 Rollers to register ring. 1.5 Correct oil level in gearboxes. All grease points charged. Gear teeth greased. 1.6 Air 
system tested. 1.7 Door operation and seating.1.8 No load test. Correct rotations. PRE INSTALLATION 2.1 Check consignment. 2.2 Offload equipment using certified lifting gear of suitable capacity, by competent person (see separate chart for nett weight). INSTALLATION 3.1 Refer to contract arrangement and site instructions. 3.2 Mixer to be mounted on supports of adequate strength and rigidity to prevent undue vibration when mixing and securely bolted. 3.3 Mixer frame to be level on structure, add packers as required.3.4 Check that pan is correctly seated on Rollers and that pan rack and drive gear are in correct mesh. 3.5 Check locating rollers to register ring. 3.6 Check operating clearances star blade to pan. Fixed blade to pan wall. Discharge blade to pan base. See maintenance section Ops Manual. ELECTRICAL SERVICES 4.1 Refer to wiring diagrams in Section 6. All wiring to be undertaken by competent electrician. 4.2 Refer to pneumatic circuit diagram in Section 7. Connect compressor. Supply compressed air 5.5 bars as required (8psi). 4.3 Refer to wiring diagram in Section 6 when connecting air control valves. 4.4 Remove transit bar and ring from door BEFORE starting mixer. 4.5 Ensure starters are mounted away from mixer on supports free of vibration. 4.6 Ensure starters are fitted with correct overloads see technical specification power units. OPERATION 5.1 Correct oil level, gearboxes. Air line lubricator. 5.2 Mixing pan clear of loose nuts and bolts to prevent damage to| Model Type | Helical speed reducer H4 |
|---|---|
| Gear Type | Helical Gear |
| Weight (kg) | 1400.000000 |
| Ratio Range | 1 : 100…355 |
| Low Speed Output | Solid shaft with parallel key acc. to DIN 6885/1 with reinforced spigot |
| Nominal Torque | 153000 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender France S.A.R.L. |
| Country of Manufacture | South Korea |
| Data Sheet & Drawings | H4VV-15-C al gear units probably already includes the right Helical speed reducer H4 |
Related Products
