H4SH-18-C flender bocholt Helical speed reducer H4

Flender/Flender Gear Units/Helical speed reducer H4

expected. Operating Humidity : 5 to 9% RH non-condensing Operating Temperature : -2 0 to +5 0 Full function self test : Automatic when the detector is turned ON. Battery : Continuous type. PHYSICAL Features : Size - 4.2 2.4 1.4. Weight - Less than 1 gms. Including battery Enclosure Case - Rugged, high impact resistant, non corrosive composite material Handling: Unit shall be easily attached to the pocket or belt. Ingress Protection : IP 6 / 6 Records & Displays : On Demand: ) TWA (Time Weighed Average) Exposures ) Peak Exposure Encountered (PEE) Automatic Calibration : Fully Automatic Zero and span Auto Zero : Initiate at any time in the field without gas Password Security : Field selectable access protection to calibration and alarm set points. Confidence Beep : Field selectable operational beep and flashing LED indicator ( for every 1 seconds when enabled ) SENSORS : Combustible: Plug in catalytic (Toxic & Oxygen ) type & Oxygen: Plug-in electrochemical cell Calibration / and Diagnostics : Automatic to give valid calibration with respect to ambience air & gas levels Operating Specification Measuring Range Response Second Detectable accuracy Resolution Operating Temperature Range Combustibles 0-1 %LEL < _ 5 1% LEL -4 to +9 oC Oxygen 0-3 % by Vol. < _ 2 0.1% by Vol -2 to+5 oC Carbon Monoxide 0.5 ppm 0-1 expandable < _ 7 1 ppm -2 to +5 oC Hydrogen Sulfide 0-1 ppm < _ 5 1 ppm -4 to +5 oC DISPLAYS : Extra large gas specific alpha-numeric: LCD around 0.4 inch high. Alarm Set points : Displayed each time the unit is turned ON. Display Backlight : Push Button timed ON. Automatic ON in Alarm Condition. 1 of 1 TECHNICAL SPECIFICATION FOR PORTABLE EXTINGUISHERS & FIRE FIGHTING EQUIPMENT ALARMS : Low and High Gas Alarm Set points, Over-Range Multiple Gas Exposure, Sensor Removed, Calibration Air, Low Battery, Low flow. Audible : 9 db FLENDER GRAFFENSTADEN 1ft. Variable pulsed bee