H4-CV-7-D ace Information about basics Data regarding rati Helical gear boxes H4

Flender/Flender Gear Units/Helical gear boxes H4

hall be provided to remove oil and condensed water from the air. These traps or separators must be of adequate size and must be drained periodically during operations. The air from the spray gun impinging against the surface shall show condensed water or oil. . Ingredients shall be kept properly mixed in the spray pots or containers during application by continuous mechanical agitation. . The pressure on the material in the pot and of the air at the gun shall be adjusted for optimum spraying effectiveness. The pressure on the material in the pot shall be adjusted when necessary for change in elevation of the gun above the pot. The atomizing air pressure at the gun shall be high enough to properly atomize the paint but not so high as to cause excessive fogging of paint, excessive evaporation of solvent, or less by overspray. . Spray equipment shall be kept sufficiently clean so that dirt, dried paint, and other foreign materials are not deposited in the paint film. Any solvents left in the equipment shall be completely removed before applying paint to the surface begin painted. . Paint shall be applied in uniform layer, with overlapping at the edge of the spray pattern. The spray patterns shall be adjusted so that the paint is deposited uniformly. During application the gun shall be held perpendicular to the surface and at distance which will ensure that wet layer of paint is deposited on the surface. The trigger of the gun should be released at the end of each stroke. . All runs and sags shall be brushed out immediately or the paint shall be removed and the surface repainted. 9 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 1 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 . Areas inaccessible to the spray gun shall be painted by brush: if not accessible by brush, daubers or sheepking shall be used. . All nameplates, manufacture