H3FH-7-C flender and siemens Helical gear unit H3

Flender/Flender Gear Units/Helical gear unit H3

Equipments earthing- Cu plate type. System Voltage Differences of potential normall existing between conductors nd between conductors and earth as follows: ) Extra-low voltage: not excee ding 5 .. or 1 ripple- ree ..; ) Low voltage: exceeding extra- low voltage, but not exceeding 1 0 .. or 1 .. ) High voltage: exceeding low voltage. NOTE In consideration of ELV status, VOC ARRAY must be used. Voltage domain for PV array Voltage domain Voltage (volts) Alternating current Smoothed direct current ELV Un 5 Uoc 1 LV 5 < Un 1 1 < Uoc 1 Marking Each PV module used in the solar power project must use RF id entification tag (RFID), which must contain the following informati on. The RFID can be inside or ou tside the module Laminate, but must be able to withstand harsh environmental conditions. ) Name of the manufacturer of PV Module ii)Name of the Manufacturer of Solar cells of PV Module iii)Month and year of the manufac ture (separately for solar cells and module). 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Solar photo voltaic ( SPV) power supply system Chapter-0.1 2, MECON Limited, All Right Reserved Page 4 of 2 iv) Country of origin (separately for solar cells and module) ) - curve for the module vi) Peak Wattage, Im, Vm and fi eld factor (FF)for the module vii)Unique Serial No. and Model No. of the module viii) Date and year of obtaining IEC/BIS PV module qualificatio certificate ix) Name of the test lab iss uing IEC/BIS Certificate ) Other relevant information on traceability of solar cells an module as per ISO 9 series. xi) Polarity of terminals or eads (colour coding is permissibl as per standard practice); xii) Maximum system voltage for which the module is suitable. The date and place of manufacture shall